Loading Analysis in Storage Tank as per API 650 | Eurocode
The purpose of this analysis is to check the wall of existing tank TK96, with a nominal diameter of 36595 mm and 20100 mm in height, under the action of…
Venting req’s of 15 Storage Tanks as per API 650 | API STD 2000
The objective of the project is to analyze the venting needs and maximum allowable working pressure of fifteen (15) storage tanks for the selection of new P/V valves. Firstly, the…
Design & Fatigue Verification of H2 Reactor | ASME VIII Div.2 + FEA
Design and calculation of reactor D-481 fabricated in CS, material SA516 Gr.70, design pressure 15.5 barg and design temperature 80ºC. The vessel operates in cyclic service, 72 cycles of 20min…
Structural Supports, Welds & Anchor Bolts Verification | FEA
Analysis of piping supports, welds and anchor bolts by means of Finite Elements (FEA). The objective of the study is to verify the validity of the support proposed for the…
Trunnions design & Calc’s of FCC Reactor | ASME VIII Div.2 + FEA
Design, calculation and verification of lifting trunnions for a FCC reactor, FC-V-1 item, installed at the Sines de Galp refinery, in Portugal. The method used for the analysis was WRC…
Internal & External pressure calc of components | ASME VIII Div.1
Verification of pipe components due to internal and external pressure, manufactured from sheet metal. Components are made of SA-240 Tp.304L material, and 3mm thickness. The calculation of the components was…
Waterhammer & Supports verification, Firefighting | CAESAR II
New firefighting system supports verification, for the new fire protection system to be installed in the Refinery. A mechanical calculation was made using CAESAR II to evaluate the effects of…
Stress & Flexibility Analysis of 14 Piping Systems
Stress and flexibility analysis according to code B31.3, with the objective of verifying 14 piping systems, confirming that the proposed layout and supports satisfy are adequate for the operating conditions,…
Stress & Flexibility Analysis of Steam System
Stress and flexibility analysis of three piping systems according to the ASME B31.1 Code. The objective of the project was to verify that both the proposed layout and the supports…
Molten Salts Storage Tank Design & Calculation
Design, calculation and verification by Finite Elements Analysis of a molten salt storage tank (thermal storage, thermosolar plant). Tank of 4m diameter and 14m high, design temperature is 570ºC. The…
Design | Fatigue Verification of H2 Reactor
Design and calculation of reactor D-481 fabricated in Carbon Steel, material SA516 Gr.70, design pressure 15.5 barg and design temperature 80ºC. The vessel operates in cyclic service, 72 cycles of 20min…
Flexibility & Stress Analysis of Air System
Stress and flexibility analysis of three piping systems according to the ASME B31.3 code. The objective of the project was to verify that both the proposed layout and the supports…
Performance Optimization in Drying System
Pressure loss analysis of a high temperature piping system belonging to the drying tower. The scope of the project was to obtain the total pressure loss of the hot air…
Design | Calculation of ASME VIII Filters
Design and calculation of four filters of different dimensions and materials: two carbon steel filters, one stainless steel and one aluminium. All filter elements were calculated according to ASME VIII…
